XGIMI MoGo 4 Laser: throw distance & specs
1080p · 550 lumens · throw ratio 1.2. For a 100″ screen it sits 8.7 ft away.
The XGIMI MoGo 4 Laser sits 8.7 ft from a 100″ screen and about 10.5 ft from a 120″ screen, set by its official 1.2 throw ratio. At 550 lumens it pairs best with a matte-white screen in the dark, or an ALR screen with some ambient light.
Throw ratio
1.2
Brightness
550 lumens
Resolution
1080p
Type
laser
| Throw ratio | 1.2 |
| Brightness | 550 lumens |
| Resolution | 1080p |
| HDR | Yes |
| Light source | laser |
| Type | Standard throw |
| Price | ~$569 |
Throw-distance calculator
XGIMI MoGo 4 Laser — distance for a 100″ screen
8.7 ft
Lens-to-screen distance. Zoom (if any) lets you fine-tune within the range.
Throw distance by screen size
How far the XGIMI MoGo 4 Laser sits from the screen at common 16:9 sizes, across its full zoom range.
Every projector’s throw distance, by screen size: 100-inch screen · 120-inch screen
Which screen for the XGIMI MoGo 4 Laser?
The XGIMI MoGo 4 Laser is a standard-throw projector, so it works with a matte-white screen in a dark room or an ALR screen if you watch with some ambient light. Match the screen size to the throw distance the calculator gives for your room.
Frequently asked questions
Compare with
Guides for this projector
How many lumens do I need?
Lumens needed scale with screen area and ambient light. As a rule of thumb, a 100-inch screen needs about 600 lumens in a fully dark room, around 1,300 for a living room with some light, and 2,700+ for a bright room. Bigger screens and more light need proportionally more.
GuidesProjector ceiling mount height
Mount the projector so its lens lines up with the top of the image when the projector has 0% offset (most do), then fine-tune with lens shift. A 100-inch 16:9 image is 49 inches (124 cm) tall, and the screen bottom usually sits 24-36 inches (60-90 cm) above the floor for seated eye level.
GuidesProjector screen size guide
A screen's "size" is its diagonal, but placement depends on width. For a 16:9 screen, width = diagonal × 0.872 and height = diagonal × 0.490. So a 100-inch screen is 87 inches (221 cm) wide and 49 inches (124 cm) tall.
Not sure it fits? Run your exact screen size through the calculator.
Back to top →Updated